4 Good Reasons Not To Buy CV

Driveaxles With Reground

Components 

1. It is virtually impossible to take used parts and hold them in position for consistent regrinding. Inconsistent regrinding results in an inferior product. 

II. In order to clean up the wear on the internal components, you must grind into the case hardening. Once you have removed the hardening you have reduced the part's resistance to wear. The part would be predisposed to failure.

Ill. CV driveaxles with reground components have been found to have excessively high failure rates. Rebuilding with new quality components has been the only method found to provide an acceptable, long-term solution.

IV. Don't be misled by unusually low priced driveaxles: it usually means an inferior product. Your Raxles authorized driveaxle specialist using new components is the solution for all of your CV problems!